User Manual Q&AAnswer
Jan 20, 2025 - 05:55 AM
To connect your Optoma X351 Multimedia DLP Projector to your computer, you can follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., duplicate, extend, or projector only).
7. Adjust the focus and zoom on the projector if necessary.
For more detailed instructions and illustrations, please refer to the user manual of the Optoma X351 Multimedia DLP Projector. You can find the manual at the following link: [Optoma X351 Multimedia DLP Projector User Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment