User Manual Q&AAnswer
Jan 20, 2025 - 05:54 AM
To connect the TOA M-82210-EB Remote Audio Input Output Panel to the M-80800, follow these steps:
1. Make sure both the M-82210 and M-80800 are powered off and disconnected from their power sources.
2. Connect a 24V DC power source to the M-80800 or M-804EX1.
3. Locate the RD IN port on the M-82210 and the corresponding RJ45 connector on the M-80800.
4. Use an Ethernet cable to connect the RD IN port on the M-82210 to the RJ45 connector on the M-80800.
5. Connect the analog audio inputs to the M-82210. For a microphone input, use an XLR connector and connect it to the MIC input on the M-82210. For line inputs, use RCA pin jacks and connect them to the Line input A and B on the M-82210.
6. Connect the analog audio outputs from the M-82210. Use xxxx terminals and connect Line output 1 and Line output 2 to your desired audio devices.
7. If you are using a microphone, you can enable phantom power by switching on the +48 VDC option for the MIC input on the M-82210.
8. Once all connections are made, power on both the M-82210 and M-80800.
Please refer to the user guide for more detailed instructions and illustrations on connecting and using the TOA M-82210-EB Remote Audio Input Output Panel.
Add New Comment