How do I install the GLOBO LIGHTING 57910-6B Ceiling Light? (GLOBO LIGHTING 57910-6B Ceiling Light Instruction Guide)

Answer

manuals.plus

Jan 20, 2025 - 05:51 AM

Installation of the GLOBO LIGHTING 57910-6B Ceiling Light is a relatively straightforward process. Please follow the steps below:

1. Before starting the installation, make sure the power supply is turned off at the circuit breaker or fuse box.

2. Carefully unpack the ceiling light and ensure that all the necessary parts are included. Refer to the parts list in the instruction manual for verification.

3. Attach the mounting bracket to the electrical box in the ceiling using the provided screws. Ensure that the bracket is securely fastened.

4. Connect the electrical wires from the ceiling to the corresponding wires on the ceiling light. The wires are typically color-coded, with black or red representing the live/hot wire, white representing the neutral wire, and green or bare copper representing the ground wire. Use wire connectors to join the wires together, following the instructions in the manual.

5. Gently tuck the connected wires into the electrical box, ensuring that they are not pinched or damaged.

6. Align the ceiling light with the mounting bracket and secure it in place using the provided screws.

7. Once the light is securely attached, restore power to the circuit by turning on the breaker or replacing the fuse.

8. Test the light by turning it on and off to ensure proper functionality.

Please note that these instructions are a general guideline, and it is important to consult the specific manual provided with your GLOBO LIGHTING 57910-6B Ceiling Light for any additional or model-specific instructions.