User Manual Q&AAnswer
Jan 20, 2025 - 05:42 AM
To assemble and install the Jura 69535 CLARIS M Waterfilter, please follow the steps below:
1. Remove the water tank from your Jura coffee machine.
2. Open the water tank lid and remove the filter holder.
3. Take the CLARIS M Waterfilter out of its packaging.
4. Rinse the filter under cold water for about 30 seconds to activate it.
5. Insert the filter into the filter holder, aligning the notches on the filter with the notches on the holder.
6. Push the filter holder with the filter into the water tank until it clicks into place.
7. Fill the water tank with fresh, cold water.
8. Place the water tank back into your Jura coffee machine.
Please note that the CLARIS M Waterfilter is designed to be used with Jura coffee machines equipped with the Intelligent Water System (I.W.S.). The I.W.S. technology automatically detects the presence of the filter and adjusts the settings accordingly.
For further information and troubleshooting, please refer to the user manual provided with the Jura 69535 CLARIS M Waterfilter.
Add New Comment