User Manual Q&AAnswer
Jan 20, 2025 - 05:35 AM
To connect your device to the Hitachi CP-DX250 projector using HDMI, please follow these steps:
1. Ensure that both the projector and your device are powered off.
2. Locate the HDMI input port on the back panel of the projector.
3. Take one end of the HDMI cable and insert it into the HDMI output port of your device.
4. Take the other end of the HDMI cable and insert it into the HDMI input port of the projector.
5. Power on your device and the projector.
6. Press the "Input" button on the projector or the remote control to select the HDMI input source.
7. The projector should now display the content from your device.
Please note that the HDMI cable is not included with the projector and needs to be purchased separately. Additionally, ensure that your device supports HDMI output and adjust the display settings on your device if necessary.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided for the Hitachi CP-DX250 projector.
Add New Comment