User Manual Q&AAnswer
Jan 20, 2025 - 05:29 AM
To install the NOVA LIFE BEITO Wall Lamp, please follow these steps:
1. Before starting installation, make sure to disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box.
2. Lay out all the parts included in the package. The parts should include:
- Part A: The fixture with wire
- Part B: Shade
- Part C: Wall expansion particle (2 pieces)
- Part D: Self-Tapping xxxx (2 pieces)
- Light source: 230V E27 1 x 40W (not included, but a LED bulb is recommended)
3. Plan the installation location on the wall. Ensure that it is suitable for the lamp and aligns with your desired lighting needs.
4. Assemble the fixture on a soft, non-abrasive surface such as carpet or cardboard to avoid damaging the product.
5. Attach the shade (Part B) to the fixture (Part A) by following the instructions provided in the manual. Ensure it is securely fastened.
6. Mark the positions on the wall where you want to install the lamp. Use a level to ensure the lamp will be straight.
7. Install the wall expansion particles (Part C) at the marked positions on the wall. Make sure they are securely attached.
8. Hang the fixture with the shade onto the wall expansion particles. Align the holes on the fixture with the particles and insert the self-tapping screws (Part D) to secure the lamp to the wall.
9. Once the lamp is securely installed, you can connect the power and test the lamp.
Please note that the light source, a 230V E27 1 x 40W bulb, is not included with the lamp. It is recommended to use a LED bulb for energy efficiency.
For any further assistance or clarification, please refer to the NOVA LIFE BEITO Wall Lamp Instruction Manual.
Add New Comment