User Manual Q&AAnswer
Jan 20, 2025 - 05:16 AM
To install the NOVA LIFE 46037-009-67 Dennis Wall Lamp, please follow these steps:
1. Turn off the power: Before starting the installation process, make sure to turn off the power supply to the area where you will be installing the lamp. This will ensure your safety during the installation.
2. Mount the lamp base: Use the provided screws and wall anchors to securely mount the lamp base onto the desired location on the wall. Ensure that the base is level and firmly attached.
3. Connect the wires: Carefully connect the lamp's wires to the corresponding wires in the electrical box in the wall. Match the colors of the wires (usually black to black and white to white) and use wire connectors to secure the connections. If you are unsure about the wiring, it is recommended to consult a qualified electrician.
4. Attach the lampshade: Depending on the specific model of the Dennis Wall Lamp, you may need to attach the lampshade. Follow the instructions provided with the lampshade to securely attach it to the lamp base.
5. Install the bulb: Refer to the label on the lamp for the recommended type and wattage of bulb to use. Make sure the lamp is turned off and the bulb has cooled down before replacing it. Insert the bulb into the lamp socket and gently twist it clockwise until it is securely in place.
6. Test the lamp: Once the installation is complete, turn on the power supply and test the lamp to ensure it is functioning properly. If the lamp does not turn on, double-check the wiring connections and bulb installation.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific manual provided with the NOVA LIFE 46037-009-67 Dennis Wall Lamp for detailed installation instructions and any additional safety precautions.
Add New Comment