User Manual Q&AAnswer
Jan 20, 2025 - 05:06 AM
To assemble the NOVA LIFE SEBA II Floor Lamp, please follow these steps:
1. Ensure that the power is disconnected by turning off the circuit breaker or removing the fuse at the fuse box before starting the installation.
2. Lay out all the parts included in the package: A (the fixture with wire), B (glass), C (marble base), D (wrench), E (cross screwdriver), and the light source (230V E14 5 x 40W Max, not included, but LED bulbs are recommended).
3. Place the marble base (C) on a soft, non-abrasive surface such as carpet or cardboard.
4. Attach the fixture with wire (A) to the marble base (C) by aligning the holes and securing them together using the wrench (D) and cross screwdriver (E).
5. Once the fixture is securely attached to the marble base, carefully insert the glass shades (B) into the designated slots on the fixture. Ensure that they are properly aligned and seated.
6. After assembly, double-check that all parts are securely fastened and in place.
7. Now, you can connect the power by turning on the circuit breaker or replacing the fuse at the fuse box.
8. To activate the floor lamp, simply turn on the light switch.
Please note that it is important to follow the instructions provided in the manual and use the recommended bulbs to ensure safe and proper operation of the lamp. Additionally, always turn off the lamp before replacing the bulb and allow the bulb to cool down before handling it.
Add New Comment