User Manual Q&AAnswer
Jan 20, 2025 - 04:59 AM
To adjust the height of the VIVO MOUNT-KB05HW White Clamp On Height Adjustable Keyboard Tray, follow these steps:
1. Assemble the slider brackets (B) to the support brackets (D) using the M4x7 screws (F). Tighten them with a Phillips screwdriver.
Note: The clamp can be offset using the extra holes in the slider brackets (B) to allow the tray to be pulled out an extra 1.2” (30mm) when in use. If mounted this way, the tray will sit further out from the desk edge.
2. Assemble the slider brackets (B) with the support brackets (D) to the keyboard tray (A) using the M5x12 screws (G). Make sure the support brackets (D) are on the opposite end of the center cable guide. Tighten them with a Phillips screwdriver.
3. Assemble the clamps (C) to the support brackets (D) at the desired height using the M5x8 screws (H). Tighten them with a Phillips screwdriver.
4. Place the pads (E) on the underside of each clamp. Then, place the assembled keyboard mount on the edge of the desk and tighten the clamps. Note: To ensure the keyboard tray is level, do not over-tighten the clamps. Slide the keyboard tray forward/back to the desired position.
If you have any further questions or need assistance, you can contact VIVO's dedicated support team at help@vivo-us.com or call them at 309-278-5303 during their office hours (Monday-Friday from 7:00 am-7:00 pm CST). They have a rapid response time and can provide immediate assistance.
Add New Comment