User Manual Q&AAnswer
Jan 20, 2025 - 04:49 AM
To connect the sniffer line to the leak detector, follow these steps:
1. Locate the connection socket provided on the front or rear of the leak detector.
2. Take the sniffer line and connect it to the connection socket on the leak detector.
3. Ensure that the electrical connection and the connection of the vacuum system are properly made.
4. The leak detector should have an interface for the specific sniffer line model (SL3000 or SL3000XL).
5. Once the sniffer line is connected, it is ready for operation.
Please refer to the "Installation" section in the instruction manual for more detailed instructions and illustrations.
Add New Comment