How do I install the Kimex 150-3305 13-27 Inch PC Monitor Arm for Slatwall? (Kimex 150-3305 PC Monitor Arm Instruction Manual)

Answer

manuals.plus

Jan 20, 2025 - 04:47 AM

To install the Kimex 150-3305 PC Monitor Arm for Slatwall, please follow the provided installation instructions carefully. Here is a step-by-step guide:

1. Before starting the installation, ensure that you have received all the necessary parts according to the component checklist provided in the box. If any parts are missing or faulty, contact your place of purchase for a replacement.

2. Make sure to read the entire instruction manual before beginning the installation process. If you have any questions or concerns, it is recommended to contact your local distributor for assistance.

3. Ensure that the supporting surface, such as a slatwall, is capable of safely supporting the combined weight of the equipment and all attached hardware and components.

4. Use the mounting screws provided with the product for installation. It is important not to over tighten the mounting screws, as this may cause damage or instability.

5. Follow the assembly instructions closely to ensure proper installation. Improper installation may result in damage or serious personal injury.

6. It is advised to have the product installed by professionals to ensure safety and proper installation.

7. Regularly check the product's security and safety at least every three months to ensure it remains secure and safe to use. Perform any necessary maintenance or adjustments as needed.

Please note that this product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.

If you have any specific questions or concerns during the installation process, it is recommended to refer to the instruction manual or contact the manufacturer or distributor for further assistance.