User Manual Q&AAnswer
Jan 20, 2025 - 04:46 AM
The installation of the JONES STEPHENS P26004 Floor Drain Trap Seal is quick and simple, requiring no special tools. Here is a step-by-step guide on how to install it:
1. Start by ensuring that the floor drain is clean and free from any debris or obstructions.
2. Take the appropriate size of the P26004 Floor Drain Trap Seal for your drain (4" in this case) and inspect it for any damage or defects.
3. Place the trap seal over the floor drain, ensuring that it is centered and aligned properly.
4. Apply downward pressure on the trap seal to create a tight seal with the drain. The durable EPDM construction of the trap seal will help to maintain the seal over time.
5. Once the trap seal is securely in place, it will automatically open to allow the flow of drainage. When there is no flow, it will close to prevent sewer gases from escaping into the room and mitigate backflow.
6. Ensure that the trap seal is properly installed and functioning by testing the drainage flow. If there are any issues, double-check the installation and make sure it is aligned correctly.
Please note that this is a general guide for installation. For more specific instructions and guidelines, it is recommended to refer to the user manual provided by JONES STEPHENS or contact their customer support for further assistance.
Add New Comment