User Manual Q&AAnswer
Jan 20, 2025 - 04:45 AM
To install the LAMPEHUSET Interior Wall Lamp, please follow these steps:
1. Before starting installation, make sure to disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box.
2. Plan the installation by reading all the instructions provided in the manual.
3. Assemble the fixture on a soft, non-abrasive surface such as carpet or cardboard to avoid damaging the product.
4. The package contents include:
- Fixture body with wire (1)
- Wall expansion particle (4)
- Self-Tapping xxxx (4)
- Washer (4)
- Sucker (1)
- Light source (not included, recommended 230V GU10 1 x 25W LED bulb)
5. Attach the wall expansion particles (B) to the wall using the self-tapping screws (C) and washers (D). Make sure to securely fasten them.
6. Connect the fixture body with wire (A) to the wall expansion particles (B) using the provided screws (C) and washers (D).
7. Install the recommended light source (not included) by following the instructions provided with the bulb. Remember to turn off the lamp and wait for the bulb to cool before replacing it.
8. Once the installation is complete, turn on the power at the circuit breaker or fuse box.
9. Activate the fixture by turning on the light switch.
For further details and illustrations, please refer to the LAMPEHUSET Interior Wall Lamp Instruction Manual provided with the product.
Note: It is important to follow all safety precautions and consult a professional if you are unsure about any aspect of the installation process.
Add New Comment