User Manual Q&AAnswer
Jan 20, 2025 - 04:44 AM
To install the Custom Dynamics High Power Driving Light Bar on your Harley Davidson motorcycle, please follow the steps below:
1. Disconnect the negative battery cable from the battery, referring to your owner's manual. This is important to prevent electrical shock, injury, or fire. Make sure to secure the negative battery cable away from the positive side of the battery and all other positive voltage sources on the vehicle.
2. Wear appropriate safety gear, including safety glasses, throughout the installation process. Ensure that the vehicle is on a level surface, secure, and cool.
3. Remove the seat and battery side cover. Disconnect the negative battery terminal as per your owner's manual.
4. Protect the front fender with a towel or fender cover to prevent damage to the painted surface during installation.
5. Locate the headlight mounting bolt underneath the bottom triple tree. Loosen the bolt and remove it.
6. Install the Driving light bar bracket on the triple tree by reinstalling the OEM headlight mounting bolt.
7. Insert the provided nuts into the slots on the back of the High Power Driving Light bar. Install the High Power Driving Light bar onto the bracket using the provided mounting bolts. Do not fully tighten, thread until snug.
8. If you are using the LB-HARN-UNV installation harness (sold separately), connect the High Power Driving Light Bar wiring harness to the LB-HARN-UNV harness after it is installed and skip to Step 10.
9. If you are hardwiring the light bar to the bike, cut the plug and play JAE connector from the Driving Light bar. Strip back the wires and connect the Red wire to a switched +12vdc fused power source. Connect the Black wire to a negative ground.
10. Reconnect the battery negative cable. Reinstall the seat and battery side cover.
11. Adjust the Driving Light bar and tighten the screws to secure it in place.
12. Test the operation of all lighting before riding.
If you have any further questions or need assistance, please call Custom Dynamics at 1 (800) 382-1388 during their customer support hours: Monday to Thursday 8:30 AM-5:30 PM and Friday 9:30 AM-5:30 PM EST.
Add New Comment