User Manual Q&AAnswer
Jan 20, 2025 - 04:33 AM
To connect your Epson PowerLite X15 projector to your computer, follow these steps:
1. Make sure both the projector and the computer are turned off.
2. Locate the VGA or HDMI port on your computer. The type of port will depend on your computer's model.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the projector. It is usually labeled as "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Turn on your computer and the projector.
7. Use the projector's remote control to select the correct input source. Press the "Source Search" or "Input" button until the computer input is displayed.
8. Your computer's screen should now be projected onto the projector.
For more detailed instructions and troubleshooting tips, refer to the Epson PowerLite X15 3000 lumens Projector User's Guide, specifically the section on "Connecting the Projector to a Computer" (page 19) in the provided manual.
Add New Comment