User Manual Q&AAnswer
Jan 20, 2025 - 04:32 AM
To connect your Dell S500wi Rechargeable Pen Projector to your computer, follow these steps:
1. Ensure that your computer and the projector are both powered off.
2. Connect one end of the VGA cable (included with the projector) to the VGA port on your computer.
3. Connect the other end of the VGA cable to the VGA input port on the projector.
4. If your computer supports HDMI, you can also use an HDMI cable to connect the computer to the projector. Simply connect one end of the HDMI cable to the HDMI port on your computer and the other end to the HDMI input port on the projector.
5. Once the cables are connected, power on your computer and the projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but typically you can find this option in the Control Panel or System Preferences.
7. If necessary, adjust the projector's focus and zoom settings to ensure a clear and properly sized image.
For more detailed instructions and troubleshooting tips, please refer to the Dell S500wi Rechargeable Pen Projector User's Guide, specifically the section on "Connecting the Projector to a Computer" (page 15) in the provided manual.
Add New Comment