User Manual Q&AAnswer
Jan 20, 2025 - 04:26 AM
To initialize the Dahua IPC-HDBW3241EP-AS Vandal Proof Dome Network Camera, follow these steps:
1. Double-click "ConfigTool.exe" to open the tool.
2. Click on the "Search setting" button.
3. Enter the start IP and end IP of the network segment in which you want to search devices, and then click "OK".
4. All the devices found in the network segment will be listed.
5. Select the device(s) with the status "Uninitialized" and click on the "Initialize" button.
6. Set and confirm the password for the device(s) and enter a valid email address.
7. Click "Next" and select the options according to your needs.
8. Click "OK" to complete the initialization process.
9. Click "Finish" to exit the initialization interface.
Please note that the device initialization is available only when the IP addresses of the device and the PC are in the same network segment. Make sure to use the same login password for all the devices you want to initialize in batch.
For more detailed information and illustrations, please refer to the "Initializing Device" section in the user manual provided.
Add New Comment