User Manual Q&AAnswer
Jan 20, 2025 - 03:27 AM
To change the tool on the BOSCH EasyDrill 1200 Cordless Drill or Driver, follow these steps:
1. Remove the battery from the power tool before starting any work.
2. Make sure the drill spindle is locked by ensuring that the on/off switch is not pressed.
3. Open the keyless chuck by turning it in the direction of rotation until the tool can be inserted.
4. Insert the desired tool (drill bit, screwdriver bit, etc.) into the chuck.
5. Firmly tighten the keyless chuck by turning it by hand in the direction of rotation. This will automatically lock the drill chuck.
6. To remove the tool, turn the sleeve of the keyless chuck in the opposite direction to unlock it, and then pull out the tool.
Note: It is important to always remove the battery before changing the tool to prevent any accidental activation of the power tool.
Please refer to the "Changing the tool" section in the BOSCH EasyDrill 1200 Cordless Drill or Driver instruction manual for more detailed instructions and illustrations.
Add New Comment