User Manual Q&AAnswer
Jan 20, 2025 - 03:24 AM
To adjust the coverage pattern of the Bose F1 Flexible Array Loudspeaker, you can shape the coverage pattern by moving the position of the top and bottom array. The array position is held in place by magnets that trigger internal sensors that adjust EQ according to the array shape. There are four coverage patterns you can choose from:
1. Straight pattern: Use this pattern when the audience is standing and their heads are approximately at the same height as the loudspeaker.
2. Reverse-J pattern: This pattern is suitable for an audience in raked seating that starts at loudspeaker height and extends above the top of the loudspeaker.
3. J pattern: The J pattern works well when the loudspeaker is up on a raised stage and the audience is seated below on the floor.
4. C pattern: Use the C pattern for raked seating in an auditorium when the first row is on the floor with the loudspeaker.
By adjusting the position of the top and bottom array, you can select the desired coverage pattern to direct sound to where the audience is located, resulting in better overall clarity throughout the venue.
Add New Comment