How do I connect the phocos PSW-H-3000Q-24 120V Any-Grid Hybrid Inverter Charger to Pylontech batteries? (phocos PSW-H-3000Q-24 120V Inverter Charger User Guide)

Answer

manuals.plus

Jan 20, 2025 - 03:16 AM

To connect the phocos PSW-H-3000Q-24 120V Any-Grid Hybrid Inverter Charger to Pylontech batteries, follow these steps:

1. Purchase the battery communication cable, either the PSW-H-BAT-CABLE-PYLON-2 (compatible with all listed batteries) or the PSW-H-BAT-CABLE-PYLON (not compatible with C models).
2. Ensure that the battery racks are turned off.
3. Locate the four battery Dip switches on each battery rack and set them according to the instructions in the manual, depending on the number of battery clusters/groups.
4. Connect the Any-Grid unit(s) to the battery power terminals with the correct polarity.
5. Connect the battery communication cable to the master battery rack's RS485 port (or B/RS485 port for C models) and the Any-Grid display panel's BMS port.
6. If using multiple Any-Grid units, connect the communication cable to any one of the inverters in the system.
7. Ensure that the battery racks are wired according to the Pylontech battery manual and turn on each battery rack.
8. Press the red START/SW button on the master battery rack for more than 3 seconds to supply power to the Any-Grid(s).
9. Ensure that the ON/OFF load power button of the Any-Grid(s) is in the ON position, but no loads are connected.
10. Apply the recommended settings to the Any-Grid unit(s) connected to the Pylontech battery, including the voltage set-points, battery equalization, and battery type.
11. Check that the battery icon outline is flashing, indicating successful communication between the Any-Grid(s) and battery racks.
12. If no warnings or errors are shown, check the successful communication connection by cycling through the screen views on the Any-Grid unit.
13. Activate the circuit breakers or insert the fuses to energize the AC input, PV input, and AC output of the Any-Grid unit(s) in the specified order.

Please note that these steps are a summary of the instructions provided in the phocos PSW-H-3000Q-24 120V Any-Grid Hybrid Inverter Charger User Guide. For more detailed information and troubleshooting, refer to the user guide or contact Phocos AG directly.