User Manual Q&AAnswer
Jan 20, 2025 - 03:14 AM
To install the base of the GoldenEar Technology Triton Two Floorstanding Loudspeaker, follow these steps:
1. Lay the speaker on its side on a soft, elevated flat surface, such as a tabletop with a towel.
2. Slide the base onto the bottom of the speaker.
3. Place one plastic washer on each bolt.
4. Position the base on the bottom of the speaker and insert the screws into the base from the underside.
5. Push each xxxx through the cloth into the threaded holes on the bottom of the Triton and loosely tighten all four screws. Make sure the washers are between the base and the heads of the screws.
6. Gently tighten each xxxx with a screwdriver. Do not over-tighten to avoid cracking the base.
7. Attach the AC cord to the outlet on the back of the speaker.
Please refer to the owner's manual for additional information and illustrations on the installation process.
Add New Comment