User Manual Q&AAnswer
Jan 20, 2025 - 03:12 AM
To connect your speakers to the Lindell Audio PE-X-500 Multi-Purpose Amplifier, follow these steps:
1. Remove the Euroblock connector from the amplifier by gently pulling it until it releases.
2. Use a small slotted screwdriver to loosen and tighten each contact on the Euroblock when inserting the speaker wire.
3. Connect the positive (+) connection of your left speaker to the positive (L+) contact on the Euroblock connector. Connect the negative (-) connection of your left speaker to the negative (L-) contact on the Euroblock connector.
4. Repeat step 3 for your right speaker, connecting the positive (+) connection to the positive (R+) contact and the negative (-) connection to the negative (R-) contact on the Euroblock connector.
5. After attaching the speaker wires to the Euroblock connector, insert it back into the Lindell Audio PE-X-500 Multi-Purpose Amplifier by gently pressing it into place.
Make sure to follow the positive and negative indications shown on the Euroblock connector and the amplifier. It's also important to use speakers that are rated for use with the amplifier and to ensure that the power is off when connecting or disconnecting anything.
For more detailed instructions and information, please refer to the owner's manual of the Lindell Audio PE-X-500 Multi-Purpose Amplifier.
Add New Comment