User Manual Q&AAnswer
Jan 20, 2025 - 03:04 AM
To connect the Yorkville C12CW Two-Way Loudspeaker System to your audio source, follow these steps:
1. Ensure that the power to both the loudspeaker system and your audio source is turned off.
2. Locate the INPUT section on the rear panel of the loudspeaker system.
3. Depending on your audio source, you have two options for connecting:
a. If your audio source has a 100V output, use a suitable cable to connect the 100V output of your audio source to the 100V INPUT on the loudspeaker system.
b. If your audio source does not have a 100V output, use a suitable cable to connect the desired output (50W/100W/200W/OFF/8Ω 300W) of your audio source to the corresponding INPUT on the loudspeaker system. For example, if your audio source has an 8Ω output, connect it to the 8Ω INPUT on the loudspeaker system.
4. Once the connections are made, double-check that they are secure.
5. Turn on the power to both the loudspeaker system and your audio source.
6. Adjust the volume levels on your audio source and the loudspeaker system as desired.
Please refer to the user manual for more detailed instructions and illustrations on connecting the Yorkville C12CW Two-Way Loudspeaker System to your specific audio source.
Add New Comment