User Manual Q&AAnswer
Jan 20, 2025 - 02:38 AM
To install the Rizoma PT553 License Plate Holder Outside Custom, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Before you start, ensure that you have all the necessary components and tools for installation. Check the completeness of the kit using the part list provided.
2. Disconnect the battery before starting the installation to avoid any electrical shock hazards.
3. Remove the OEM license plate from your motorcycle. After removing it, use the screws, spacers, and nuts to fix the rear fender on both sides.
4. Install the swivel bracket according to the instructions provided.
5. Install the license plate bracket onto the swivel bracket.
6. Install the license plate onto the license plate bracket.
7. Insert the electric wiring as instructed. Ensure that the pins are isolated and respect the polarity in the connections.
8. If applicable, install the adjustable license plate feature according to the provided instructions.
9. Install the cover as instructed.
10. Make the necessary electric connections, ensuring that you follow the polarity in the connections and that the terminals are properly isolated.
Please note that these instructions are a general guide. For more specific details and illustrations, please refer to the Rizoma PT553 License Plate Holder Outside Custom User Manual. It is important to carefully read, understand, and follow the instructions to ensure correct installation and safe usage of the product. If you have any doubts or need further assistance, it is recommended to consult your authorized Rizoma dealer.
Add New Comment