How do I install the LUCIDE CINTRA LED Table Lamp? (LUCIDE CINTRA LED Table Lamp Instruction Manual)

Answer

manuals.plus

Jan 20, 2025 - 02:34 AM


To install the LUCIDE CINTRA LED Table Lamp, please follow the instructions below:

1. Before starting the installation, ensure that the power is isolated to prevent any accidents. It is recommended to have a qualified electrician perform the installation.

2. Choose a suitable location for the lamp. The LUCIDE CINTRA LED Table Lamp is designed for indoor use only, except for bathrooms (if the lamp has a higher IP degree). Avoid installing the lamp in humid places or in contact with water, liquids, or inflammable products.

3. During installation, make sure that the cables are not squeezed or damaged by sharp edges. If the external flexible cable is damaged, it should be replaced exclusively by the manufacturer, their service agent, or a qualified electrician to avoid any risks.

4. Allow the lamp and bulbs to cool down before touching them, as they can become very hot during operation.

5. Always use the correct bulb for the lamp, respecting the type and maximum wattage as indicated on the product.

6. If the lamp has a dimmer control, it can be adjusted using the dimmer located on the lamp itself.

7. If any part of the lamp, especially the protection glass, is damaged or broken, it should be replaced immediately.

Please note that this is a general guide for installation. For more specific instructions or if you have any doubts, it is recommended to consult the LUCIDE CINTRA LED Table Lamp Instruction Manual or contact a qualified electrician.