How do I install the Style SELECTIONS 1678VA-31-311-934 31 Inch Vanity? (Style Selections 1678VA-31-311-934 Instruction Manual)

Answer

manuals.plus

Jan 20, 2025 - 02:21 AM

Here is a step-by-step guide on how to install the Style SELECTIONS 1678VA-31-311-934 31 Inch Vanity:

1. Before starting the installation, ensure that all parts are present and undamaged. Refer to the package contents list and hardware contents list provided in the instruction manual.

2. Clean the area where the vanity will be installed, making sure it does not interfere with any water supply and drain lines.

3. With the help of another person, carefully place the vanity against the wall in its final location. Use the pre-assembled levelers on the bottom of each leg to level the vanity. Twisting the levelers counterclockwise raises the height, while twisting them clockwise lowers the vanity.

4. Once the vanity is level, drill a hole through the vanity mounting area and into the wall studs. Secure the vanity to the wall using appropriate mounting hardware. It is recommended to secure the vanity to two wall studs for increased stability.

5. Apply stain-free silicone caulk to the top edge of the vanity. With the help of another person, lower the top onto the vanity and wipe away any excess caulk. Allow the caulk to dry for approximately 24 hours.

6. Insert shelf pins at the desired height and place the shelf on top of the pins.

7. If necessary, adjust the doors by loosening the screws on the hinges and adjusting the door position. Retighten the screws once the adjustment is made.

8. If desired, switch the handles by removing the existing handles and attaching the other finish provided.

9. Install the faucet and drain assemblies according to the manufacturer's instructions to complete the installation.

Please note that this is a general overview of the installation process. For more detailed instructions and diagrams, refer to the Style SELECTIONS 1678VA-31-311-934 31 Inch Vanity Instruction Manual provided.