User Manual Q&AAnswer
Jan 20, 2025 - 02:19 AM
To install the Lucci decor 309134 Dolce 1lt Wall Bracket, please follow these steps:
1. Ensure that the power to the circuit you are working on has been switched OFF before starting any electrical work.
2. Remove all packaging material from the product and make sure no accessories are missing.
3. Place the luminaire on a smooth non-scratch surface.
4. Loosen the grub screws (J) on the luminaire housing (K) using the allen key (L) provided, and remove the housing from the luminaire (D).
5. Loosen the screws (F) and remove the mounting bracket (B) from the luminaire (D).
6. Use the mounting bracket (B) as a template to mark the xxxx positions on the wall.
7. Install the mounting bracket (B) onto the wall using appropriately sized mounting screws (C) and anchors (A). Make sure the screws and anchors are suitable for the mounting surface and the surrounding environment.
8. Connect the mains supply wire to the terminal block (E) on the luminaire. Ensure that the earth wire is connected to the yellow/green wire, the neutral wire is connected to the blue or black wire, and the live wire is connected to the brown or red wire. Make sure the wires are secure and no bare wires are exposed.
9. Install the luminaire (D) onto the mounting bracket (B) and secure it by tightening the screws (F).
10. Install a suitable globe (not included) into the lamp holder (H). Do not exceed the maximum wattage rating.
11. Install the luminaire housing (K) onto the luminaire (D) by tightening the grub screws (J) with the allen key (L) provided.
12. After installation, switch on the luminaire to test all the lighting functions.
Please note that these instructions are a summary and it is important to refer to the complete instruction manual for detailed guidance and safety precautions.
Add New Comment