How do I assemble the ZACHVO HDW30843198DM Rolled Arm Polyester Straight Sofa? (ZACHVO HDW30843198DM Arm Polyester Sofa Instruction Guide)

Answer

manuals.plus

Jan 20, 2025 - 02:13 AM

To assemble the ZACHVO HDW30843198DM Rolled Arm Polyester Straight Sofa, please follow these steps:

1. Unbox the sofa and ensure that all the necessary parts and hardware are included. Refer to the "What's in The Box" section of the installation instructions for a list of components.

2. Place the sofa frame in the desired location. Make sure there is enough space to maneuver and assemble the sofa.

3. Attach the legs to the bottom of the sofa frame. The legs should align with the pre-drilled holes on the frame. Use the provided screws or bolts to secure the legs in place. Tighten them firmly but do not overtighten.

4. Attach the backrest to the sofa frame. Line up the holes on the backrest with the corresponding holes on the frame. Insert the screws or bolts through the holes and tighten them securely.

5. Attach the arms to the sofa frame. Each arm should align with the designated side of the frame. Insert the screws or bolts through the holes on the arms and into the corresponding holes on the frame. Tighten them securely.

6. If applicable, attach any additional components such as cushions or decorative elements according to the provided instructions.

7. Once all the components are securely attached, inspect the sofa for any loose connections or parts. Make sure everything is properly tightened and aligned.

8. Finally, test the stability and comfort of the assembled sofa by sitting on it and applying gentle pressure. If any issues are found, refer to the troubleshooting section of the installation instructions or contact the manufacturer for further assistance.

Please note that the above instructions are general guidelines and may vary slightly depending on the specific model of the . Always refer to the installation instructions provided in the box for the most accurate and detailed assembly instructions.