Answer

Jan 20, 2025 - 02:08 AM
To install the CLOVIS 21S01105-63 Freestanding Soaking Solid Surface Bathtub, please follow the provided installation instructions:
1. Start by unpacking the bathtub and ensuring that all the necessary components are included in the packing list, which should include the bathtub itself and a drain pipe.
2. Before installation, it is important to note that due to the nature of the material, the bathtub's dimensions can differ up to 20mm from the listed dimensions. Keep this in mind during the installation process.
3. Begin by selecting a suitable location for the bathtub. Ensure that the floor is level and capable of supporting the weight of the bathtub when filled with water.
4. Place the bathtub in the desired location and check for any gaps between the bathtub and the floor. If there are any gaps, use shims or leveling feet to ensure the bathtub is stable and level.
5. Connect the drain pipe to the bathtub according to the manufacturer's instructions. Ensure that the drain pipe is securely attached to prevent any leaks.
6. Once the drain pipe is connected, test the bathtub for any leaks by filling it with water. Check for any water seepage around the drain pipe or any other areas. If any leaks are detected, tighten the connections or consult a professional plumber for assistance.
7. After confirming that there are no leaks, the installation is complete. You can now enjoy your CLOVIS 21S01105-63 Freestanding Soaking Solid Surface Bathtub.
Please refer to the provided installation diagram in the manual for a visual representation of the installation steps. If you encounter any difficulties or have further questions, it is recommended to consult a professional plumber or contact the manufacturer for additional support.
Add New Comment