User Manual Q&AAnswer
Jan 20, 2025 - 01:54 AM
To install the FISHER PAYKEL AHSRDB19 Square Fine Handle Kit on your integrated refrigerator freezer, please follow these steps:
1. Ensure that the refrigerator freezer is turned off and unplugged from the power source before starting the installation process.
2. Remove any existing handles or hardware from the refrigerator freezer door.
3. Take the Square Fine Handle Kit and align it with the pre-drilled holes on the refrigerator freezer door. The handle should be positioned vertically.
4. Insert the provided screws through the holes in the handle and into the corresponding holes on the door. Use a screwdriver to tighten the screws securely.
5. Repeat the process for the other handle if you are installing a pair.
6. Once the handles are securely attached, check for any wobbling or loose connections. If necessary, tighten the screws further to ensure a stable installation.
7. After the handles are installed, you can proceed to attach a Fisher and Paykel stainless steel door panel or your own custom cabinetry panel to complete the integrated look.
Please note that these instructions are a general guideline, and it is always recommended to refer to the specific user guide or installation manual provided with the FISHER PAYKEL AHSRDB19 Square Fine Handle Kit for any additional details or specific instructions related to your model.
Add New Comment