User Manual Q&AAnswer
Jan 20, 2025 - 01:52 AM
To connect the Aperion Audio Verus III Grand V6C Center Channel Speaker to your amplifier, follow these steps:
1. Connect a two-pole (+/-) loudspeaker cable to the binding posts located at the rear of the cabinet. The binding posts can accommodate different connection systems:
- Banana plugs: Insert the pins directly into the binding post without tightening.
- Cable spades: Loosen the binding posts, insert the spade into the opening, and secure the spade by tightening the posts.
- Bare wires: Loosen the binding posts, place the cable into the binding posts, and tighten the posts.
2. Connect the other ends of the loudspeaker cable to the loudspeaker outputs of your switched-off power amplifier.
Note: The loudspeaker cable can have an impact on sound quality. It is recommended to use high-quality cables and keep the cable length as short as possible. Ensure that all connectors are clean and not oxidized.
For more detailed instructions and illustrations, please refer to the Aperion Audio Verus III Grand V6C Center Channel Speaker User Guide.
Add New Comment