User Manual Q&AAnswer
Jan 20, 2025 - 01:50 AM
To connect the Vanatoo Transparent One speakers to your computer, follow these steps:
1. Turn down the volume on both the speakers and your computer to minimum.
2. Locate the correct input connector on the back panel of the active speaker. The options are: Digital Coax In, Analog In, Optical, or USB In.
3. Depending on the output of your computer, choose the appropriate cable. If your computer has a 3.5mm headphone jack, use a 3.5mm to 3.5mm cable. If your computer has RCA outputs, use a 3.5mm to RCA "Y" cable. If your computer has a digital output, use either a coaxial or optical cable.
4. Connect one end of the cable to the output of your computer and the other end to the corresponding input connector on the active speaker.
5. Turn on the power switch on the active speaker.
6. Set the volume control on the active speaker to the desired level.
7. Adjust the volume on your computer to a comfortable listening level.
Your Vanatoo Transparent One speakers should now be connected to your computer and ready for audio playback. Refer to the user guide for more information on optimizing the settings for your specific setup.
Add New Comment