User Manual Q&AAnswer
Jan 20, 2025 - 01:33 AM
To connect the Sonos Playbase to your TV, follow these steps:
1. Check your TV connections: Make sure your streaming device, gaming console, DVD/Blu-ray player, and cable box are all connected directly to your TV. Disconnect any existing speakers and audio receiver that you won't need with the Playbase.
2. Plug the cables into the Playbase:
- Audio cable: Remove the protective caps and connect the audio cable into the Playbase's digital audio input.
- Power cord: Push the power cord all the way into the Playbase's power port.
3. Choose a location for the Playbase:
- Under a TV: Lift your TV and place the Playbase under it with the Sonos logo facing front. Make sure your TV sits flat and is fully supported by the Playbase.
- On a TV cabinet shelf: Place the Playbase toward the front of the furniture, but don't let it hang over the edge. Allow 1-inch clearance on both sides.
4. Plug the cables into the TV and power:
- Audio cable: Connect the other end of the audio cable into your TV's digital audio output.
- Power cord: Plug the power cord into a wall outlet.
5. Download the Sonos app: Open the Sonos app on your mobile device and follow the setup instructions.
Once the Playbase is connected and set up, you can use your TV remote to adjust the volume. The Sonos app allows you to control volume, activate speech enhancement and night mode, and play music. The Playbase also has touch controls for volume and music playback.
For more detailed instructions and troubleshooting, refer to the user manual provided with the product.
Add New Comment