User Manual Q&AAnswer
Jan 20, 2025 - 01:18 AM
To install the Brilliant 21931-05 UNI TRIO 8W CCT Downlight, please follow these steps:
1. Disconnect power: Before starting the installation, make sure to turn off the power to the area where you will be installing the downlight.
2. Cut a hole in the ceiling: Use a Ø82mm hole saw to cut a hole in the ceiling where you want to install the downlight.
3. Insert plug and cord: Insert the plug and cord of the downlight into the ceiling through the hole you just cut. Connect the 2-Pin mains plug to a suitable power socket.
4. Insert the light into the ceiling: Lift the spring clips up and insert the downlight into the ceiling, making sure it is securely held in place.
5. Insulation rating: Refer to page 2 of the instruction manual for insulation clearance requirements. Make sure to follow the guidelines to ensure proper installation.
6. Restore power: Once the downlight is securely installed, restore power to the area by turning on the power switch.
Please note that these are general installation instructions. It is important to always consult a qualified electrical contractor for installation to ensure compliance with Australian Standards and local building codes.
Add New Comment