How do I connect the PTN3816EVM evaluation board to my computer and DisplayPort monitor? (NXP PTN3816EVM Evaluation Board User Manual)

Answer

manuals.plus

Jan 20, 2025 - 01:10 AM


To connect the PTN3816EVM evaluation board to your computer and DisplayPort monitor, follow these steps:

1. Power the evaluation board: Connect a micro USB cable to the micro USB connector (J404) on the evaluation board and connect the other end to a 5V power supply.

2. Connect the board to your computer: Use a DisplayPort cable to connect the DisplayPort connector on the left side of the board (J401, marked as "TO HOST") to the DisplayPort connector on your computer's graphics card.

3. Connect the board to your monitor: Depending on your monitor's interface, you can choose one of the following options:
   - DP-2-DP cable: Use a DisplayPort to DisplayPort cable to connect the DisplayPort connector on the right side of the board (J402, marked as "TO Monitor") to your DisplayPort monitor.
   - DP-2-HDMI adapter: Use a DisplayPort to HDMI adapter to connect the DisplayPort connector on the right side of the board (J402, marked as "TO Monitor") to your HDMI monitor.
   - DP-2-VGA adapter: Use a DisplayPort to VGA adapter to connect the DisplayPort connector on the right side of the board (J402, marked as "TO Monitor") to your VGA monitor.

Once the connections are made, the PTN3816EVM evaluation board should be ready to interface between your computer and DisplayPort monitor. Please refer to the user manual for more detailed instructions and information on configuring the board for different settings.