User Manual Q&AAnswer
Jan 20, 2025 - 01:01 AM
To install the ILUMINAR iLogic8 UV+Far Red 30W 120-277V LED Fixture, follow these steps:
1. Lay the central mast on a flat surface with the attachment brackets facing up.
2. Attach each LED Bar by aligning the plastic clips and sliding them into place until you hear a soft click.
3. Once all the LED bars are attached, connect the A/C cables coming from the mast to each LED bar by aligning the connector pins and pressing the ends together. Lock by twisting in opposite directions.
4. Turn the fixture over and ensure the flat surface is clear of anything that could damage the diodes.
5. If you plan to suspend mount the fixture, attach the 4 rope ratchets to the LED bars. Lift the LED and attach the carabiners to pre-installed hooks from the ceiling or mounting beam. Adjust the ratchets to raise or lower the fixture as needed.
6. Once the fixture is hanging with all LED bars installed, connect the power cable from the outlet to one side of the fixture.
7. If you plan to daisy chain multiple fixtures, consult the manual for instructions on connecting them together.
Please note that it is important to follow all safety precautions mentioned in the manual and seek the assistance of a qualified electrician or installation professional if needed.
Add New Comment