User Manual Q&AAnswer
Jan 20, 2025 - 12:57 AM
To configure a static IP address for the SAVANT PAV-SMS2001-10 IP Audio Music Server, you can follow the steps below:
1. Access your router's settings: Open a web browser and enter the IP address of your router in the address bar. This IP address is usually printed on the router itself or mentioned in the router's documentation.
2. Log in to your router: Enter the username and password for your router. If you haven't changed these credentials, you can find the default username and password in the router's documentation.
3. Locate the DHCP reservation settings: The location of these settings may vary depending on your router model. Look for options related to DHCP or LAN settings.
4. Add a DHCP reservation: Find the option to add a new DHCP reservation. You may need to provide the MAC address of the SAVANT PAV-SMS2001-10 IP Audio Music Server, which can usually be found on a label on the device itself.
5. Assign a static IP address: Within the DHCP reservation settings, assign a specific IP address to the SAVANT PAV-SMS2001-10 IP Audio Music Server. Make sure the IP address is within the same subnet as your local area network (LAN).
6. Save the settings: Once you have entered the necessary information, save the settings in your router's interface.
By configuring a DHCP reservation with a static IP address, you ensure that the IP address of the SAVANT PAV-SMS2001-10 IP Audio Music Server will not change even after a power outage. This allows for easier management of all devices from a single user interface without the need to access each device individually. For more detailed instructions and specific steps based on your router model, refer to the documentation provided with your router or consult the Savant Device Networking Guidelines on the Savant Customer Community.
Add New Comment