User Manual Q&AAnswer
Jan 20, 2025 - 12:53 AM
No, the TYPE S Touring Items AC58333 Universal Shift xxxx is specifically designed for threaded shifter sticks. It may not be compatible with non-threaded or differently threaded shifter sticks. Please ensure that your shifter stick is threaded before attempting to install this shift xxxx .
To install the shift xxxx , follow these steps:
1. Unpack and identify the components of the TYPE S shift xxxx .
2. Remove the shift xxxx 's lower collar and slide it over the gear stick shift.
3. Fasten the new inner collar to the top of the stick shift using the correct-sized sleeve supplied, if needed. Use the allen wrench provided to firmly tighten the set xxxx .
4. With the inner collar securely attached to the stick shift, xxxx the TYPE S shift xxxx onto the inner collar and tighten it.
5. Finally, xxxx the lower collar onto the TYPE S shift xxxx and tighten it.
6. After installation, it is recommended to check for tightness after driving approximately 50 miles.
Please note that this shift xxxx is intended solely for decorative purposes. Before installation, it is important to check local laws and regulations regarding the installation and use of such products. The manufacturer and seller assume no liability for improper installation or use, which are solely the responsibility of the purchaser.
If you have any further questions or concerns, you can contact TYPE S directly at 1.866.294.9244 or email them at info@typesauto.com.
Source: https://manuals.plus/type-s-touring-i... xxxx -rager-manual
Add New Comment