User Manual Q&AAnswer
Jan 20, 2025 - 12:42 AM
To install the TKH SECURITY FD2002v2F 2MP Fixed Dome Camera, please follow these steps:
1. Unpack the camera: Start by unpacking the camera and ensuring that all the necessary components are included.
2. Installation Notices: Take note of the installation notices mentioned in the user guide. It is important to have the installation performed by qualified personnel only and in accordance with local procedures. The camera contains batteries, and battery replacement should not be attempted due to the risk of explosion. Dispose of used batteries according to the instructions provided.
3. Camera cabling: Connect the camera to the appropriate power source and network using the recommended cabling. Follow the instructions in the user guide for the specific cabling requirements.
4. Pan/Tilt: Adjust the camera's pan and tilt settings as desired for optimal viewing angles. Refer to the user guide for instructions on how to adjust the pan and tilt settings.
5. Reset button: The camera has a reset button that can be used to restore factory default settings, including the IP address, username, and password. Press and hold the reset button for 10 seconds to initiate the reset process.
6. SD card: The camera may have an SD card slot for local storage. If you plan to use an SD card for recording, ensure that it is compatible and follow the instructions provided in the user guide for inserting and configuring the SD card.
7. Accessing the Camera - DHCP: If your network uses DHCP (Dynamic Host Configuration Protocol), the camera will automatically obtain an IP address. Refer to the user guide for instructions on how to access the camera using DHCP.
8. Accessing the camera - Fixed IP: If you prefer to assign a fixed IP address to the camera, follow the instructions in the user guide for configuring the camera with a fixed IP address.
9. Auto detect with SDM2: The camera may support auto detection using the SDM2 software. Consult the user guide for instructions on how to use SDM2 for auto detection.
10. First-time camera login: When accessing the camera for the first time, you will need to log in using the default username and password provided in the user guide. Follow the instructions in the user guide for the initial login process.
11. Browser-based Viewer: Once logged in, you can access the camera's browser-based viewer to configure settings, view live video, and perform other functions. Refer to the user guide for instructions on using the browser-based viewer.
12. Recording with micro SD card: It is not recommended to continuously record with the micro SD card 24/7, as it may not support long-term continuous data read/write. Contact the manufacturer of the micro SD card for information regarding reliability and life expectancy.
For more detailed information and instructions, please refer to the TKH SECURITY FD2002v2F 2MP Fixed Dome Camera User Guide provided with the product.
Add New Comment