User Manual Q&AAnswer
Jan 19, 2025 - 11:50 PM
To reverse the door on your Esatto ETM314X 314L Top Mount Refrigerator, please follow these steps:
1. Power off the appliance and remove all food from the door shelves.
2. Remove the hole cover and upper hinge cover.
3. Unscrew the screws of the upper hinge and remove the upper hinge.
4. Lift the freezer door until it is completely separated from the cabinet.
5. Remove the middle hinge by unscrewing the screws.
6. Remove the two hole plugs and the xxxx cap on the middle beam.
7. Remove the refrigerator door.
8. Remove the lower hinge assembly from the lower right corner and remove the hole cap and xxxx cap from the lower left corner.
9. Dismantle the hinge shaft and adjustable foot and reinstall them on the left side of the fridge using screws. Install the hole cap and xxxx cap on the lower right corner.
10. Dismantle the stoppers and sleeve pipes on the lower cover of both refrigerator door and freezer door.
11. Install them on the other side of both doors and exchange the installation of the sleeve pipe and hole cap on the top of the refrigerator door.
12. Remove the left decorative cover of the freezer door and move the sleeve pipe.
13. Install the compartment door on the lower hinge and then install the middle hinge and hole caps.
14. Take out the left upper hinge, left upper hinge cover, and right decorative cover from the accessory bag. Install the freezer door on the middle hinge and install the left upper hinge, left hinge cover, and hole cap. Finally, install the right decorative cover on the right side of the end cap of the freezer door.
Please refer to the user manual for detailed diagrams and instructions on reversing the door.
Add New Comment