How do I assemble the AECOJOY 19033GR 5 Pieces Chairs and Rectangular Table Set? (AECOJOY 19033GR Rectangular Table Set Instruction Manual)

Answer

manuals.plus

Jan 19, 2025 - 11:48 PM


To assemble the AECOJOY 19033GR 5 Pieces Chairs and Rectangular Table Set, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Part I: Install the Table
- Open box A and locate the table top (A) and four legs (B).
- Connect the four legs to the table top using the flat washer (C), nut (D), and cap (E).
- Make sure to align the holes properly before tightening the screws.
- Secure all the screws tightly after all the screws are in place.

2. Part II: Install the Chairs
- Open box B and locate the right armrest (A1), left armrest (B1), backrest (C1), seat (D1), flat washer (G1), long bolt (E1), short bolt (F1), and cap (H1).
- Connect the right armrest (A1) and left armrest (B1) to the backrest (C1) using the flat washer (G1), long bolt (E1), and cap (H1). Do not tighten them yet.
- Connect the seat (D1) to the backrest (C1) using the flat washer (G1), short bolt (F1), and cap (H1).
- Then, connect the seat (D1) to the armrests (A1 & B1) using the flat washer (G1), short bolt (F1), and cap (H1).
- Make sure to align the holes properly before tightening the bolts.
- Tighten all the bolts after all the screws are in place.

3. Finish the Assembly
- Once you have completed the assembly of the table and chairs, make sure to tighten all the bolts to ensure stability and safety.

If you encounter any issues during the assembly process or if any parts are missing or damaged, please contact the manufacturer's customer support. They will provide professional advice or assistance within 24 hours.