User Manual Q&AAnswer
Jan 19, 2025 - 11:44 PM
To connect the Cocktail Audio COAUX40 HD Hi-Res Music Server to your audio system, you have multiple options depending on your setup. Here are the steps for the most common connection methods:
1. Analog Connection:
a. Use the provided RCA cables to connect the COAUX40's RCA Line Out jacks to the corresponding RCA inputs on your amplifier or receiver.
b. Make sure to match the left and right channels correctly.
2. Digital Connection:
a. Use a digital coaxial cable or an optical cable to connect the COAUX40's digital output (either coaxial or optical) to the corresponding digital input on your amplifier, receiver, or DAC.
b. Set the COAUX40's digital output mode to match the type of cable you are using (coaxial or optical).
3. USB Connection:
a. Connect the COAUX40's USB output to a USB input on your amplifier, receiver, or DAC using a USB cable.
b. Make sure to use a USB cable that supports audio transmission (USB Audio Class 2.0 or higher).
c. Set the COAUX40's USB output mode to match the capabilities of your connected device (USB Audio Class 1.0 or 2.0).
For more detailed instructions and illustrations, please refer to the "Connection and Setup" section of the Cocktail Audio COAUX40 HD Hi-Res Music Server Owner's Guide, which can be found in the provided manual (page 12 onwards).
Add New Comment