User Manual Q&AAnswer
Jan 19, 2025 - 11:40 PM
To mount the Siemens SITOP PSU200M power supply unit, follow these steps:
1. Use a standard mounting rail TH35-15/7.5 (EN 60715) to mount the unit.
2. Ensure that the terminals are at the bottom when mounting the device.
3. Maintain a clearance of at least 50 mm above and below the device, with a maximum cable channel depth of 50 mm.
For more detailed information and illustrations, please refer to Figure 8 in the manual (Page 1).
Note: It is important to follow the relevant country-specific regulations when installing the device.
Reference: Siemens SITOP PSU200M Manual, Page 1, Figure 8.
Add New Comment