User Manual Q&AAnswer
Jan 19, 2025 - 11:39 PM
To install the INNOVATIVE 8524 Top Down Mount for Staxx, follow these steps:
1. Ensure that you have all the necessary components included in the package.
2. If the monitor arm or pole does not easily fit into the mount, remove the bushing from the mount.
3. Place the bushing on the monitor arm or pole and press firmly back into the mount.
4. Once the bushing is properly inserted, you can proceed with the installation.
5. Determine the desired location for the mount on your desk or workstation.
6. Position the mount and align it with the mounting holes on your desk or workstation.
7. Insert the screws provided through the mounting holes and tighten them securely.
8. Ensure that the mount is stable and securely attached to the desk or workstation.
9. Attach the monitor arm or pole to the mount according to the instructions provided with the specific model.
10. Make sure all connections are tightened and secure.
11. Adjust the monitor arm or pole to the desired height and angle for optimal viewing.
12. Double-check that everything is properly installed and tightened before using the mount.
For further assistance or if you encounter any issues during the installation process, you can contact Innovative Ergonomic Solutions at 800-524-2744 or customerservice@team-ies.com. Alternatively, you can reach out to HAT Collective at 408-437-8770 or cs@hatcollective.com. They will be able to provide additional support and guidance.
Add New Comment