User Manual Q&AAnswer
Jan 19, 2025 - 11:24 PM
To connect your device to the OSD NERO-STREAM-WRA Outdoor Amplifier using Bluetooth, follow these steps:
1. Press the Source Select button on the amplifier until the Bluetooth indicator begins flashing, indicating that it is ready to connect.
2. Activate Bluetooth on your phone or tablet by going to the settings menu and turning on Bluetooth.
3. Start searching for new Bluetooth devices on your phone or tablet. The OSD NERO-STREAM-WRA should appear in the list of available devices.
4. Select the OSD NERO-STREAM-WRA from the list of available devices on your phone or tablet to begin the pairing process.
5. Once the pairing is successful, you should see a confirmation message on your phone or tablet, and the Bluetooth indicator on the amplifier will stop flashing and remain solid.
6. You can now play music wirelessly from your phone or tablet through the OSD NERO-STREAM-WRA Outdoor Amplifier.
Note: If you want to remove a previously paired device, press and hold the Connect/Reset button on the amplifier for 2 seconds.
For more detailed instructions and troubleshooting tips, please refer to the instruction manual provided with the OSD NERO-STREAM-WRA Outdoor Amplifier.
Add New Comment