User Manual Q&AAnswer
Jan 19, 2025 - 11:16 PM
Sure! Here are the step-by-step instructions on how to program the LiftMaster R11 Garage Door Remote:
1. Locate the learn button on the back of the motor unit of your garage door opener.
2. Press and release the learn button. The light on the motor unit will illuminate for 30 seconds, indicating that the unit is in programming mode.
3. Within 15 seconds of pressing the learn button, press the button on the remote control that you wish to program.
4. You will hear an audible click and/or the light on the motor unit will turn off, indicating that the remote control has been successfully programmed.
5. Repeat steps 1-4 for any additional remotes you wish to program.
6. Wait for 60 seconds before attempting to program another remote control.
Please note that these instructions are for programming the remote control to your garage door opener. If you have any issues or need further assistance, it is recommended to consult the user manual provided with your LiftMaster R11 Garage Door Remote.
Additionally, it is important to follow the safety precautions mentioned in the manual. Keep the remote control out of the reach of children, only use it when the garage door is visible and properly adjusted, and ensure there are no obstructions to door travel. Always keep the gate or garage door in sight until it is completely closed and avoid allowing anyone to cross paths with the moving door while operating the remote control.
Add New Comment