Answer
![manuals.plus](https://data3.answerbase.com/answerbase/15673/UserFiles/User3627018/profileImage3627018.jpg?638365818380000000)
Jan 19, 2025 - 11:08 PM
To use the Carmen C5040 PRO Roller Set to create voluminous and curly hair, please follow these steps:
1. Dry your hair as usual and make sure it is clean and dry before using the rollers.
2. Comb your hair thoroughly and avoid using any flammable chemical hair care products.
3. Place the Carmen Pro Roller Set on a hard, heat-resistant surface.
4. Plug the device into a socket.
5. Keep the cover of the roller set closed until the indicator dots on the rollers turn white. This indicates that the rollers are warm and ready to use.
6. Section your hair into strands that are 5 to 6 cm wide.
7. Brush or comb through each section to keep it smooth.
8. Take a strand of hair that is not wider than the roller and place the ends of the strand on the roller.
9. Roll the hair towards the scalp while holding the lock of hair tight and perpendicular to the scalp. The tighter the roller is put against the scalp, the better the result.
10. Use the included butterfly or metal clips to secure the roller in place.
11. Use the thin rollers for smaller curls and the thick rollers for larger curls and loops.
12. Repeat steps 8-11 for all sections of hair.
13. Once all the rollers have been used, unplug the device.
14. We recommend testing how long the roller should stay in the hair for the desired effect using a lock of hair. If your hair curls easily, a short period of time will be enough. If your hair does not curl easily, leave the rollers in your hair until they have cooled down.
15. To ensure that the curls stay in for a longer time, you can apply a light hair-strengthening product before rolling your hair around the rollers.
16. To remove the rollers, carefully hold the ends between your thumb and forefinger and roll them out of your hair. Put the curl back in the created hairstyle using your fingers and allow it to cool down for a few seconds.
17. Once your hair has cooled down, you can set your hair in the desired hairstyle using a brush, comb, or your fingers.
Please refer to the user manual for additional safety measures, cleaning instructions, and warranty information.
Add New Comment![Sending...](https://manuals.answerbase.com/images/loading-boxes.gif)