User Manual Q&AAnswer
Jan 19, 2025 - 11:05 PM
Yes, you can paint the Definitive Technology AW-6500 speakers to match your color scheme or blend in with their surroundings. The manual provides detailed instructions on how to paint the speakers.
Here are the steps to follow for painting the speakers:
1. Gather the necessary materials: a spray can of primer paint (such as Krylon Spray Primer #1318 or equivalent), a spray can of the paint of your choice (choose exterior grade paint if using the speakers outdoors), a paperclip, awl, or corkscrew (for removing the grille), masking tape, and a paint mask (not included) to cover parts that should not be painted.
2. Separate the parts of the speaker: Remove the bracket knobs and brackets by rotating the bracket knobs counter-clockwise until they come off. Remove the grilles by carefully hooking them with an awl or bent paper clip and pulling gently away from the cabinet.
3. Mask the necessary areas: Mask the binding posts on the back of the speaker, the metal threaded xxxx inserts on the end panels, and the metal screws on the bracket knobs. Carefully mask both baffles to protect the drivers, tweeters, low-bass radiators, and baffles. Make sure the tape forms a tight seal around the edges to prevent paint from getting on the speaker parts.
4. Prepare to paint: Rotate the logo badge on the grille to its desired orientation. Apply two thin coats of primer to the cabinets and locking knobs. The brackets do not require primer. Once the primer is completely dry, apply the finish color.
5. Paint the grille: The grille features an even, protective powder coating that can be painted over. Using spray paint, apply two thin coats of finish color directly to the grille. Be careful not to fill the holes in the grille with paint.
6. Let the paint dry: Allow the paint to dry completely before removing the masking materials.
7. Reassemble the speaker: Carefully fit the grille back into its recess, ensuring it is just resting on the cabinet. Starting with one corner, go around the speaker and push the grille into the grille notch a little bit at a time. Be gentle to avoid bending the grille.
By following these steps, you can customize the appearance of your AW-6500 speakers to suit your preferences and blend in with their surroundings.
Add New Comment