User Manual Q&AAnswer
Jan 19, 2025 - 10:21 PM
To connect the EPEVER LS-LPLI Series Charge Controller & LED Driver, follow these steps:
1. Connect the PV positive and negative wires to the corresponding terminals on the controller.
2. Connect the battery positive and negative wires to the corresponding terminals on the controller.
3. Connect the load positive and negative wires to the corresponding terminals on the controller.
4. If using a temperature sensor, connect it to the designated port on the controller.
Please ensure that the connections are made correctly and securely. It is important to pay attention to the polarity of the wires (+ and -) to avoid any damage to the controller or connected devices.
For a visual reference, you can refer to Figure 2 in the user manual, which shows the wiring diagram for the serial connection of LED components to the charge controller.
Note: Before making any connections, make sure to read and understand the user manual provided by EPEVER for detailed instructions and safety precautions.
Add New Comment