User Manual Q&AAnswer
Jan 19, 2025 - 09:49 PM
To adjust the monitor's settings using the OSD, please follow the steps below:
1. Press the Menu button located on the bottom bezel of the monitor. This will bring up the OSD menu on the screen.
2. Use the navigation buttons (usually located next to the Menu button) to move through the OSD menu options. The navigation buttons typically include an up arrow, down arrow, left arrow, and right arrow.
3. Once you have highlighted the desired menu option, press the Menu button again to enter that menu.
4. Within each menu, you can use the navigation buttons to scroll through the available settings and options.
5. To make adjustments, select the desired setting using the navigation buttons and press the Menu button to enter that setting.
6. Use the navigation buttons to increase or decrease the value of the selected setting. The specific adjustment options will vary depending on the menu and setting you are in.
7. After making the desired adjustments, press the Menu button to exit the setting and return to the previous menu.
8. To exit the OSD menu completely, navigate to the "Exit" or "Close" option in the menu and press the Menu button.
For more detailed instructions and illustrations, please refer to the user manual provided above. The manual will provide step-by-step guidance on navigating the OSD menu and adjusting various settings on the Lenovo G24-20 Gaming Monitor.
Add New Comment